Low VOC Water Based Floor Anti Static Water Based Epoxy Paint

Water-Based Anti-Static Floor Paint

Waterbased floor coating featuring conductive fillers and low VOC content for sustainable and effective floor protection

Product Introduction

Water-based anti-static floor paint is an environmentally friendly coating with water as the dispersion medium. It is composed of water-based epoxy resin, conductive fillers (such as carbon black, metal oxides), and curing agents. It quickly dissipates static charges through a conductive network, and the resistivity is usually controlled at 10⁶~10⁹Ω·cm. Its core advantage lies in the combination of environmental friendliness (low VOC, no pungent odor) and functionality (anti-static, wear-resistant, chemical corrosion resistance).

Application Scope

1.Mainly used in static-sensitive places such as precision electronics, medicine, military industry, and data centers, including:

2.Electronic Manufacturing: Semiconductor workshops, computer rooms, microelectronic production lines.

3.Pharmaceutical and Chemical Industry: Aseptic laboratories, pharmaceutical workshops, explosion-proof warehouses.

4.Industrial Scenarios: AGV robot channels, heavy machinery workshops.

Performance Characteristics

1.Anti-static Performance: Water-based anti-static floor paint can effectively eliminate or reduce the generation and accumulation of static electricity, ensuring the safety of personnel and equipment; especially suitable for static-sensitive places such as electronic factories and laboratories.

2.Environmental Safety: Uses water as a diluent; extremely low odor; VOCs content is much lower than national standards; suitable for sensitive places such as schools, hospitals, and office buildings.

3.Wear and Corrosion Resistance: Water-based anti-static floor paint  adopts advanced formula; has good wear resistance and chemical erosion resistance; prolongs service life.

4.Strong Decorativeness: Diverse colors; flat and smooth surface; improves overall aesthetics.

Construction Process

1.Base Layer Treatment: Grind and clean the floor; humidity ≤5%.

2.Primer Construction: Penetrate and seal the base layer to enhance adhesion.

3.Copper Foil Paving: Connect conductive piles according to the grid layout to form a conductive network.

4.Intermediate Layer Scraping: Level the mortar layer mixed with conductive powder and enhance conductivity.

5.Topcoat Construction: Apply self-leveling topcoat to ensure flatness and anti-static function.

Technical Indicators