Impact Resistance Epoxy Self Leveling Flooring Cement Terrazzo Floor Leveling Epoxy
Impact Resistance Epoxy Self Leveling Flooring
,Terrazzo Floor Leveling Epoxy
,Cement Floor Leveling Epoxy
Epoxy Self Leveling Flooring Garage Floor Leveling Epoxy
Scope of application
Areas with high mechanical property requirements, such as cement or terrazzo floors in machinery factories, hardware factories, wharves, driveways, garages, industrial plants, automobile and aircraft repair shops, etc., which require strong abrasion resistance and certain impact resistance.
Coating properties
Pressure and impact resistance
Resistant to general chemical corrosion
Optional colors, beautiful appearance
Good abrasion resistance and long service life
Coating structure
Technical indicators
All tests (except drying time) need to be performed after 7 days of curing (25°C)
| Experimental items | Unit | Indicator | |
| Drying | Surface drying | H | ≤4 |
| time (25°C) | Internal drying | H | ≤24 |
| Pencil hardness | - | ≥2H | |
| Impact resistance (500g steel ball) | g·cm | Pass | |
| Abrasion resistance (750g/500r) | g | ≤0.03 | |
| Adhesion (cross cut) | Grade | 1 | |
| Resistant to 3% salt water | 7 days | No significant change | |
| Resistant to 20% sodium hydroxide | 7 days | No significant change | |
| Resistant to 10% sulfuric acid | 7 days | No significant change | |
Construction procedures
Thickness of coating: 1mm-3mm for one strand, beyond 2mm need to trowel sand. Only after 24 hours after the construction is completed can people go on it, and only after 72 hours can it be re-pressurized. (25°C shall prevail, the opening time needs to be extended moderately in the case of low temperature)
| Construction method | Host material | Auxiliary material | Reference dosage | |
| Plain ground | Prepare for waterproofing | / | / | / |
| Base coat | Roller coating epoxy primer | DS-30# | / | 0.15kg/m2 or so |
| Mortar layer | Add quartz sand and scrape the epoxy medium coat | DS-400 | Quartz sand | 0.25-0.7kg/m2 |
| Putty layer | Scrape putty layer | DS-400 | / | 0.10kg/m2 once |
| Top coat | Roller coating epoxy top coat | DS-143 | / | 0.15-0.18kg/m2 |
| After completion, the overall floor is bright and clean, with uniform color and no hollowing | ||||
