65BPN Anti Slip Floor Coating Non Slip Floor Paint Epoxy Resin With Ceramic Granules
65BPN Anti Slip Floor Coating
,Non Slip Floor Paint Epoxy Resin
,65BPN Non Slip Floor Paint
Anti-Slip Floor Coating
antislip floor coating using epoxy resin combined with ceramic granules for superior grip and color coded safety applications
Product Introduction
Anti-slip floor coating (such as colored ceramic granule anti-slip road surface) is a functional coating made of epoxy resin, polyurethane, or MMA (Methyl Methacrylate) resin as the base, combined with high-temperature fired ceramic granules (particle size 1-4mm). Its core function is to enhance the road surface friction coefficient through the granular structure, while providing color identification and durable protection.
Application Scope
Anti-Slip Floor Coating is suitabie for transportation field,public facilities,special scenarios.
1.Transportation Field: Highway curves, toll stations, bus lanes, ETC lanes, tunnel entrances and exits, etc.
2.Public Facilities: Sidewalks, bicycle lanes, parking lots, stadium steps, barrier-free access for the disabled.
3.Special Scenarios: Ramps, bridges, airport runways, industrial area division, roads in snowy and icy cities.
Performance Characteristics
1.Anti-slip Property: The granular structure can shorten the braking distance by more than 40% and reduce slipping by 75%.
2.Durability: Low temperature resistant (-30℃), high temperature resistant (80℃), UV aging resistant.
3.Environmental Friendliness: No VOC emission; some products allow recycling of granules for reuse.
4.Easy Construction: Fast curing (open to traffic in 3-5 hours); old road surfaces can be directly renovated.
Construction Process
1.Base Layer Treatment: Asphalt needs to be cured for 1-2 months; concrete needs to be cured for 1 month to ensure dryness and flatness.
2.Primer Construction: Cement base layer needs to be rolled and coated with special primer; asphalt base layer can be omitted.
3.Scrape and Coat Glue: Scrape and coat 2-3mm thick anti-slip glue in layers; paste masking tape in color-divided areas.
4.Spread Granules: Spread 1-4mm particle size granules as needed (5kg/m²); recover unadhered granules after 4-5 hours.
5.Topcoat Protection: Some scenarios require brushing a transparent topcoat to enhance durability.
Technical Indicators
|
Item |
Indicator Requirement |
|
Bond Strength |
>1.2MPa |
|
Abrasion Resistance |
<0.06g/1000 cycles |
|
Water Resistance |
No abnormality after 7 days of immersion |
|
Anti-slip Coefficient (BPN) |
≥65 (wet condition) |
|
Curing Time |
Tack-free time ≤3 hours, full cure time ≤48 hours |
